Wheel Aliment needed. 66 mustang in or around GTA

[RedSN]

Didn’t want to start a new thread. Need a new alignment guy. Bob is long gone, but the guys at Auto1One were still doing alignments. Now they seem to be gone also! Replacing tie rod ends this weekend and will need an alignment. Just a daily driver, doesn’t need racecar specs. Anything reliable in the 401 corridor between say Woodbine to Leslie?

[ZR]

Spoke with the guys at Auto 1 in mid August, target was to close up and retire by Sept.

[Uncle Buck]

I would think that for a late model daily driver you can go just about anywhere with a decent machine.

[ZR]

Sadly results have very little to do with the machine, operator that knows / cares is the key.

[fast Ed]

Didn’t want to start a new thread. Need a new alignment guy. Bob is long gone, but the guys at Auto1One were still doing alignments. Now they seem to be gone also! Replacing tie rod ends this weekend and will need an alignment. Just a daily driver, doesn’t need racecar specs. Anything reliable in the 401 corridor between say Woodbine to Leslie?

Only changing tie rod ends? Check it with a tape measure on the front and rear of the tread and adjust as needed.