Does TPS affect idle in a 2V?

**Laffs** · 08-23-2021, 09:47 AM

Originally Posted by Zippy

which intake???

https://www.trickflow.com/search/pro...r-ford-4-6l-2v

**Zippy** · 08-23-2021, 09:56 AM

Originally Posted by Laffs

https://www.trickflow.com/search/pro...r-ford-4-6l-2v

Nice. I'm looking at doing that one as well but with the dual 57mm TB from a bullit/cobra. (already have the TB, aka I stole it from ZR's office without him noticing)

**Laffs** · 08-23-2021, 01:39 PM

Originally Posted by Zippy

Nice. I'm looking at doing that one as well but with the dual 57mm TB from a bullit/cobra. (already have the TB, aka I stole it from ZR's office without him noticing)

Sounds saucy. I'm honestly doing the intake more to make the underhood dress up a bit than for performance. However the rough/ ride quality of my car might get addressed first thinking on it...

**maxwell6** · 10-04-2021, 03:17 PM

Hey Laffs I installed the TFS street burner on my 2v works like a champ. If you have any questions just ask.

**maxwell6** · 10-05-2021, 07:43 AM

Also used the Accufab 75 mm throttle body. Dont use the supplied lower intake gasket get a new felpro. The supplied gasket leaked, all other gaskets were fine.

ZR · 10-05-2021, 07:44 AM

Got pics?

**bbriann** · 10-05-2021, 09:24 AM

I once installed a new OEM TPS just for what thought would be nice to do and got rpm hang time issues...reinstalled original TPS from 2004...runs fine again...

**Laffs** · 10-06-2021, 11:24 AM

I was just planning to light it on fire with me in it.

**Frankie** · 10-06-2021, 12:14 PM

I swapped the TPS in my 99 Cobra chasing a throttle lag problem, night and day difference.
The car is much more responsive now.

I had the RPM hang issue last year, turned out to be loose intake tube behind the MAF.

**maxwell6** · 10-08-2021, 08:53 AM

20210205_163923_resized[4536].jpg

Thread: Does TPS affect idle in a 2V?

Thread Tools

Search Thread

Display

Pic of TFS Streetburner intake and ACCUFAB 75mm throttle body

Posting Permissions