Does TPS affect idle in a 2V?

[Laffs]

which intake???

https://www.trickflow.com/search/pro...r-ford-4-6l-2v

[Zippy]

https://www.trickflow.com/search/pro...r-ford-4-6l-2v

Nice. I'm looking at doing that one as well but with the dual 57mm TB from a bullit/cobra. (already have the TB, aka I stole it from ZR's office without him noticing)

[Laffs]

Nice. I'm looking at doing that one as well but with the dual 57mm TB from a bullit/cobra. (already have the TB, aka I stole it from ZR's office without him noticing)

Sounds saucy. I'm honestly doing the intake more to make the underhood dress up a bit than for performance. However the rough/ ride quality of my car might get addressed first thinking on it...

[maxwell6]

Hey Laffs I installed the TFS street burner on my 2v works like a champ. If you have any questions just ask.

[maxwell6]

Also used the Accufab 75 mm throttle body. Dont use the supplied lower intake gasket get a new felpro. The supplied gasket leaked, all other gaskets were fine.

[ZR]

Got pics?

[bbriann]

I once installed a new OEM TPS just for what thought would be nice to do and got rpm hang time issues...reinstalled original TPS from 2004...runs fine again...

[Laffs]

I was just planning to light it on fire with me in it.

[Frankie]

I swapped the TPS in my 99 Cobra chasing a throttle lag problem, night and day difference.
The car is much more responsive now.

I had the RPM hang issue last year, turned out to be loose intake tube behind the MAF.

[maxwell6]

20210205_163923_resized[4536].jpg