Loading...
Remove Text Formatting

Likes Likes:  1
Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: 2011 Ford Mustang GT 6pd Fluid recommendations

  1. #1
    Roushcharged
    Join Date
    Mar 2014
    Location
    Brampton
    Posts
    678

    2011 Ford Mustang GT 6pd Fluid recommendations

    So now that spring is here...... I know doesn't feel like it yet! I'm preparing to get a few things done and one of them is to change out the transmission and differential oils. I have been reading in to recommended oils for the MT-82 transmission and have gotten a range of different recommendations. A lot of guys are running either Amsoil Manual Transmission & Transaxle Gear Lube (MTG) or Manual Synchromesh Transmission (MTF). Some prefer one over the other, some guys found it got even more notchy. There has also been a lot of talk about Redline MTL. Any MT-82 Coyote owners here that can give me some feedback? I'm also looking to replace the differential oil as well so would like to hear your thoughts on replacement oil for that as well.

    Thanks.

  2. #2
    Mustang Occasionally
    Join Date
    Mar 2014
    Location
    At my home.
    Posts
    2,851
    Some info here (and more threads if you search)...

    http://gtamc.com/showthread.php?1252...smission+fluid

  3. #3
    Roushcharged
    Join Date
    Mar 2014
    Location
    Brampton
    Posts
    678
    Quote Originally Posted by Armen View Post
    Some info here (and more threads if you search)...

    http://gtamc.com/showthread.php?1252...smission+fluid
    Thanks Chris...... Good bit of reading. I did search, just not there.

  4. #4
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    39,030
    No clear winner here yet. Try one oil in a ride, owner reports huge difference, same oil in another and hear it's a ton worse.
    If it was mine, would try either non synthetic Dexron III or Amsoil Syncromesh. Do suspect the Amsoil would make it more notchy when cold but just like in my T56, would likely go away within a block or three of starting off cold.

  5. #5
    Roushcharged
    Join Date
    Mar 2014
    Location
    Brampton
    Posts
    678
    That's the dilemma, some say its gold others say its crap. In all honesty I haven't had any issues with it the way it is. I don't generally drive in cold weather but after owning the 05 I know enough to ease 1-2 and 2-3 shifts first thing in morning regardless of the weather, once the car is up to operating temps no issues. Even the "blender" or "grinding" sound some get at low RPM's is second nature to me. My 05 did it and so does this one, I choose not to hear it.

  6. #6
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    39,030
    If your happy now, use the factory suggested fill.

  7. #7
    Roushcharged
    Join Date
    Mar 2014
    Location
    Brampton
    Posts
    678
    I think I will get the Barton 2 post installed and drive it around a week or two and see what that does.

  8. #8
    Member Ray721's Avatar
    Join Date
    Mar 2014
    Location
    Bowmanville
    Posts
    1,686
    If you aren't having problems don't switch it lol. I have three bottle of Amsoil waiting for mine but I'm afraid of making it worse lol.

    However temps are starting to become noticeable when I touch the console around the tranny. My2006 used to get pretty warm. Then I switched to Mobil ATF and it ran ice cold from that point on. It really liked it. Different car though.
    Follow me on Instagram @ray721_14gt for car pics and general shenanigans

    Because Rayscar!!!!

  9. #9
    Super Moderator newbiestangowner's Avatar
    Join Date
    Mar 2014
    Location
    Burlington,Ont
    Posts
    3,653
    I stuck with the factory fill- instead of barton i'm thinking this http://www.mgwltd.com/2011-short_throw_shifter.shtml i saw this posted on one of the threads here but at the time it wasn't available to order yet.

    supposed to help with our mt 82 shifter woes lol

    2014 GT- MT 82, 3.73,Roush a/b, Forgestar f14 19x9/10 firestone firehawk indy 500- 255 F /285 R ,BMR springs sp009, pan hard, koni yellows ,m/m caster,
    MGW XSPEC low profile 2.625in throw
    slo turd 5.0, even slower driver

  10. #10
    AJ 5.0
    Guest
    factory fluid was garbage for me, im running the Amsoil that DaSilva recommends, shifts like butter!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service