ROUSH M90 SUPER CHARGER KIT - MISSING A FEW HARDWARE BOLTS DUE TO SHIPPING.

[Monera3v]

Hello everyone,

I have acquired my supercharger kit, after many dispute with the border in regards to charging me 1600 dollars in HST and Duty.

Now, that I have received the kit. It seem that almost a whale bag of hardware bolts and nuts fell out (mostly the ones to bolt up alternator bolts to the relocation bracket), as the box was re-tapped by the customs folks at the location where the bolts were.

All main components seem to have made it here safely.

Where would be the best place in scarborough I can bring my part list and have them source out bolts and nuts for me?

Also should I get regular bolts or get something like a grade 5 or 8 or would that be too much for aluminum.

The info would be much appreciated.

573557365734

[Uncle Buck]

Beautiful kit!

When I was sourcing bolts, I was surprised to find that Lowes has an excellent variety of metric bolts. They are obviously in the hardware section but not so obvious, you'll find them in the cabinet drawers below the wall display.

Bolts Plus is another good option. There's one in Richmondhill

[ZR]

Unless they are odd ball bolts, bulk is your best friend.

[svo1990mustang]

$1600 TAXES AND DUTY!!!

nice looking kit though!


Unless they are odd ball bolts, bulk is your best friend.

^^agreed!

[Monera3v]

$1600 TAXES AND DUTY!!!

nice looking kit though!



^^agreed!

I only ended up paying 400 HST for it.
now 120 for new gaskets
and 50 bucks for some missing hardware.

Seller has reimbursed me for anything missing.

[Arboc]

brafasco pickering

or other locations

[Monera3v]

brafasco pickering

or other locations

Oh Hey there Arboc! I been searching for you on the forums!

Thanks that the 3rd recommendation for Brafasco!

Thank you

[NickD]

I'd maybe try reaching out to roush directly, I'm sure the parts department could sell you a kit of all new hardware and then you done have to worry about lengths etc

Sent from my Nexus 6P using Tapatalk

[Monera3v]

I'd maybe try reaching out to roush directly, I'm sure the parts department could sell you a kit of all new hardware and then you done have to worry about lengths etc

Sent from my Nexus 6P using Tapatalk

They told me 120 per hardware kit XD for about 10-15 bolts.

[Uncle Buck]

They told me 120 per hardware kit XD for about 10-15 bolts.

The bolts must say Roush on them

[NickD]

I'd just pay it to make sure I had the right stuff and it was all new, I'm ocd with torque specs etc

Sent from my Nexus 6P using Tapatalk

[ZR]

If parts list provides full bolt specs, match up and be done.

[94stang87]

^ that's what I did with my old vortech kit that was missing lots of bolts

[Scrape]

Looking good!

[Scott]

Looks great, good luck sourcing the bolts! I think I am with Nick on this one. I would go for the complete hardware package especially considering that "washers" could be in fact "spacers". I guess you can determine this from the install instructions.

[Monera3v]

Looks great, good luck sourcing the bolts! I think I am with Nick on this one. I would go for the complete hardware package especially considering that "washers" could be in fact "spacers". I guess you can determine this from the install instructions.

Funny thing, Roush sales rep told me they tell most of their clients to just go to the local hardware store and pick them up! lol

[allicedout]

Funny thing, Roush sales rep told me they tell most of their clients to just go to the local hardware store and pick them up! lol

Saves them from going to their local hardware store, buying it, packaging it and sending it to you!! Oddly enough I've had issues with some parts I've bought used and 90% of the time when you contact the manufacturer and ask to buy the missing parts they're more then happy to send it to you free of charge. The only issue is shipping to Canada so I just have them send to my cousin in NJ and we sort it out after that. Were you missing a lot of hardware?

[Scott]

Funny thing, Roush sales rep told me they tell most of their clients to just go to the local hardware store and pick them up! lol

That is great news then, I know with the Vortech supercharger mount that several of the washers are in fact "spacers" and must be in the correct location or you are pucked.

[Monera3v]

Jesus,
2 new gasket, 110 + 38 duty
New filter 102 dollars + 40 duty
300 bucks for 2 gasket and a filter. Roush better stamped on those items. lol
Missing hardware 15 bucks

[newbiestangowner]

Jesus,
2 new gasket, 110 + 38 duty
New filter 102 dollars + 40 duty
300 bucks for 2 gasket and a filter. Roush better stamped on those items. lol
Missing hardware 15 bucks

wow- seems to be addiing up, but are you good now? ( ready for instal :thumbsup:l) or do you still have to pick up more stuff.

[Mrods]

You still got a killer deal all in. Try shopping a Roush kit in Canada right now and you be around $9k all in.

[Monera3v]

wow- seems to be addiing up, but are you good now? ( ready for instal :thumbsup:l) or do you still have to pick up more stuff.

Gasket came in

The hardware store is getting the bolts and nuts ready for Monday
new air filter coming Monday as well.

Fuel system upgrade is all in.

[TurboFox]

You still got a killer deal all in. Try shopping a Roush kit in Canada right now and you be around $9k all in.

for an m90 lol? come on

[Mrods]

for an m90 lol? come on

Sad but true.. a Polished M90 kit is $5,850 USD and does not include a fuel system upgrade. The system I received a quote on was a polished m90 kit @$5,850 + Ford Racing fuel pump @ $699. (overkill for the M90, I know) + $700 shipping and duty. Converted to CDN was $9,347.

[TurboFox]

Really? That's brutal those blowers were on grand prix gtps lol. Are you running 6 or 8psi? Any meth?

[Mrods]

I ended up going another route. Just thought Monera96 scored a great deal, even with some ancillary parts to buy. The M90 will make 430 rwhp plus with the right pulley and tune. He's going to have a blast

[ZR]

Hell of a deal. With exchange so far off, what was a rip just a couple of years ago is a deal today.

[Monera3v]

With the cost of exchange,
Shipping
Taxes
Upgrades
The entire kit cost me just around 6500 and that everything to make it run 10lbs properly (spark, fuel, + monitors)
So yeah if the kits is 9k can... I think I did well =)
Slap it onto the virgin motor

I shall be EEEEEEEEEEEEEEEEEEEEEEE'Ing everywhere I go lol

[Uncle Buck]

Not bad at all, and a polished kit to boot.