sn95 brake on a fox

[onDjuice]

Ok my new fox has 94/95 spindles on it. Would like to run my draglite skinny up front on test and tune nights. I need to run a spacer or can i just cut off the caliper bracket on the front part of it. I really don't like the wheel sticking out past the fender.

[tulowd]

Cut off what part ? surely not the caliper bracket but the backing plate mount?

those spindles are worth some decent money....if they remain uncut.

[tulowd]

http://www.maximummotorsports.com/tech_front_susp_spindle_identification.aspx

[onDjuice]

sn94 spindles is what I have. The caliper bracket front bar that going under the outside pad. Or just put some fox lower control arms instead of the sn94 ones??

[TurboFox]

Honestly dude you are confusing me. I ran 13" front cobra brakes with sn95 spindles and a spacer and the tires did stick out.

[onDjuice]

^^^ what lower controls arm are you using.

[TurboFox]

UPR. here is a pic from way back when with the spacer. Right at the fender

http://i5.photobucket.com/albums/y188/iamdean17/IMG_1323-1.jpg (http://s5.photobucket.com/user/iamdean17/media/IMG_1323-1.jpg.html)

[onDjuice]

Thanks bro but that's to far out for me..

[TurboFox]

Yes but if you don't even have cobra brakes you don't need a spacer

[onDjuice]

My draglites hit the caliper bracket without a spacer or I have to modify the bracket. Will post pics ..