Line Lock Switch mount

[Nsty04SVT]

So had the line lock installed in the Cobra and was checking out a good place to mount the switch. I did some Googling and some guys have used a 94-00 fog light switch which fits into the useless coin holder slot. Love the idea just wondering if it's easy to hook up? I am not so good with electrical stuff...lol

This is the 94-00 fog light switch:

http://www.torontomustangclub.ca/forums/attachment.php?attachmentid=1224&d=1403707745

Here is the switch that comes with the SLP Kit:

http://www.torontomustangclub.ca/forums/attachment.php?attachmentid=1225&d=1403708002

Thanks,
Jeff

[toofast306]

I love re-purposing OEM switches for stuff like this.
Two items for your consideration - I'm pretty sure the LL button is supposed to be momentary to prevent you from accidentally turning it on and forgetting to turn it off (happened to me in the burnout box - duhhh).
I recently wired in a Summit LL and found the factory switch didn't carry enough voltage to energize the solenoid. Regardless of switch selection, use a relay with battery voltage to ensure proper operation.

[Nsty04SVT]

Exactly it makes for a nice clean install :)

The SLP line lock is on/off toggle not momentary - flip it on, pump brakes to build pressure, smoke tires and flip switch off which releases the brakes and roll out.

Was hoping I could somehow just plug the 2 wires into the fog light switch and be done...lol

[toofast306]

Sure you can (pump brakes FIRST, then hit switch), just be mindful of the switch when it's activated!
I also found that blipping the throttle to build vacuum before pumping the brakes seems to help clamp the brakes, too.

[Nsty04SVT]

Okay cool I'll try and pick a used one up from the wreckers and see if I can figure it out.

[ZR]

Easy as pie for you, switch is triggering ground side of the circuit.

https://www.speeddawg.com/sites/default/files/imagecache/product_full/Pro%20Black%20w%20White%20shift%20knob%20Line%20Lo ck%20SK501NL-PW-5RDR-12.jpg

[Nsty04SVT]

Easy as pie for you, switch is triggering ground side of the circuit.

https://www.speeddawg.com/sites/default/files/imagecache/product_full/Pro%20Black%20w%20White%20shift%20knob%20Line%20Lo ck%20SK501NL-PW-5RDR-12.jpg

That looks awesome Rick!! I would be worried about hitting the button while banging gears though...lol... going to check out their website!

[svo1990mustang]

Nice Knob!! lol


That looks awesome Rick!! I would be worried about hitting the button while banging gears though...lol... going to check out their website!

You can always put another switch in that circuit so that momentary switch won't do anything when that other switch is off.

[AJ 5.0]

That looks awesome Rick!! I would be worried about hitting the button while banging gears though...lol... going to check out their website!


i use a speed dog knob with a button for my msd two step, love it the button isnt in the way at all, looks badass and works!

WIN/WIN!

[Nsty04SVT]

Okay ya'll convinced me :D just put the order in for the below with the optional momentary switch can't wait going to look killer!

http://www.torontomustangclub.ca/forums/attachment.php?attachmentid=1226&d=1403719617

[USAWIT2]

I wired mine with a relay and an energizing switch by the ashtray and put a momentary switch in the shifter
http://img.tapatalk.com/d/14/06/26/uzutapas.jpg

[Blackmare]

Okay ya'll convinced me :D just put the order in for the below with the optional momentary switch can't wait going to look killer!

http://www.torontomustangclub.ca/forums/attachment.php?attachmentid=1226&d=1403719617

What knob style did you go with Jeff?

[Nsty04SVT]

What knob style did you go with Jeff?

It's like the one pictured above Black ball with White lettering and White Ford Logo - 6 speed pattern with Reverse on the upper right.

They also have an option to add the momentary switch so chose that as well :)

Here's the link:
https://www.speeddawg.com/shift-knobs/ford-licensed-series/ford-oval-shift-knob-with-pattern

[ZR]

As suggested, use the existing switch to turn the circuit off when your not using the LL. When your at the track (or quiet road in Mexico), turn the switch on to activate the system, trigger via the shifter mounted button.

[Nsty04SVT]

Looking forward to it Rick, I'll follow your advise for sure like the idea of being able to turn off while not in track mode :thumbsup:

[daddy2000gt]

So had the line lock installed in the Cobra and was checking out a good place to mount the switch. I did some Googling and some guys have used a 94-00 fog light switch which fits into the useless coin holder slot. Love the idea just wondering if it's easy to hook up? I am not so good with electrical stuff...lol

This is the 94-00 fog light switch:

http://www.torontomustangclub.ca/forums/attachment.php?attachmentid=1224&d=1403707745

Here is the switch that comes with the SLP Kit:

http://www.torontomustangclub.ca/forums/attachment.php?attachmentid=1225&d=1403708002

Thanks,
Jeff


I mounted the SLP toggle in the coin slot spot, looks pretty good..

[Intmdtr]

Pretty trick setup using the coin holder delete. If you need a hand installing it, swing by the beach. The know is good, you could still use the fog light switch to turn the circuit on

[Nsty04SVT]

Thanks Brian! Just received an email from them this morning and it could take 3-4 weeks to deliver.

[Intmdtr]

I have a handful of switches here Jeff that I have used for various things. They are the low profile round rocker style switches if you are interested....

[Nsty04SVT]

Cool I am back to work now but will be home in 2 weeks, I'll PM you once I get close to coming back to civilization :)

[Blackmare]

It's like the one pictured above Black ball with White lettering and White Ford Logo - 6 speed pattern with Reverse on the upper right.

They also have an option to add the momentary switch so chose that as well :)

Here's the link:
https://www.speeddawg.com/shift-knobs/ford-licensed-series/ford-oval-shift-knob-with-pattern

Great choice!

[Intmdtr]

Sounds good

[Scott]

Looks like a pretty cool shift knob and switch!