View Full Version : Bypass valve for carb and blower
4GOTNPNY
02-06-2022, 12:46 AM
I’m throwing my blower on the king cobra and using a csu blow through carb. Is a v3sc making 6psi it’s going a 304 small block. I have the bypass valve from my EFI setup can I use it for my carb setup and just vent it to atmosphere or do I need a blow off valve?
Sent from my iPhone using Tapatalk
88 hatchback
02-06-2022, 12:57 AM
is it a recirculation bypass? With MAF based cars - they make sense as that air is normally metered
Honestly, for 6lbs - I don't see it worth doing, with all the info I've managed to dig up - unless you're running 10lbs+ there isn't enough force on the throttle blades to worry about.
On smaller boost set ups, we've actually seen them run better / more consistent idle etc with a valve.
4GOTNPNY
02-06-2022, 01:24 PM
On smaller boost set ups, we've actually seen them run better / more consistent idle etc with a valve.
I would imagine it would run better the one I have does not open i until 13lbs and I’m only asking because the budget doesn’t allow me to get a different pulley setup right now, and I have a gentleman from Pennsylvania mustang group willing to trade me straight up for an igloo for a carb and he wants my valve as well and if it’s going to sit I will just do the trade to get my car going for April https://uploads.tapatalk-cdn.com/20220206/3c0237dcdee9329534586712dc96d7b1.png
https://uploads.tapatalk-cdn.com/20220206/10ecc62d9413ea648d766c20549e3f88.jpg
Sent from my iPhone using Tapatalk
Interested to see how your carb'd n charged set up works.
4GOTNPNY
02-06-2022, 02:54 PM
Me to I’m more of an EFI guy but this is more budget friendly got them carb off a buddy o us e the blower already so just need some minor stuff and away we go
Sent from my iPhone using Tapatalk
TC86GT
02-06-2022, 10:19 PM
If you have a CSU carb set up as a blow through, you don't need an enclosure. That usually reserved for unmodded carbs and can be temperamental from what I understand.
Typically on a carb set up you'd want a blow off valve that is open at idle to vent off the excess air being made by the blower. A quick drop in vacuum should snap it shut and you're good to go. You may get away without one at low boost though, some do it that way.
If you are on Facebook, look up the Blowthrough Mob. Plenty of great resources there, if you aren't already a group member.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.