Foxbody IRS swap

[1993cobra]

Recently installed front 94/95 Mustang front spindles and an IRS from a 2004 Cobra in to my Foxbody. Big issue here finding wheel fitment for this set up especially for the rear. Can anyone help me out on this.

[ZR]

Hopefully either Gabe or Suki chime in, both have Mod Fox's.

[ChickenLips]

05+ stock Mustang rims fit pretty well. I use Bullits.

[Gabe]

Yes, 05+ wheels work well.
Currently I have 18 x 9.5” wheels with +38mm backspacing with 275 35 18 rubber all around, direct bolt-in in the back with 1/2” spacers and extended studs in the front.

I have a set of 18 x 9 +38mm 2018 Mustang PP2 chrome replica wheels with 245 40 18 Nitto NT05’s for sale that are a perfect fit on the car if you are interested

[ChickenLips]

just checked, stock Bullets are 17x8 x45. There's room for fatter.

Control arm and K member used will affect the front. I do use spacers, but 1/4 or 3/8. My cars haven't been on the ground in a while so I don't recall exactly.

[1993cobra]

Yes i am interested can I get a phone number off you