PDA

View Full Version : Changing Intercooler Coolant



Gr8Stang
04-14-2020, 06:03 PM
Wondering what the best procedure is for doing this. I have a Moroso Intercooler tank which I see has a valve to empty it....but wondering how to get the rest of the fluid out of the system and then refilled.

Any suggestions appreciated.

bbriann
04-14-2020, 06:39 PM
Probably air compressor tank supply would work. I have flushed my engine coolant system with tap water garden hose , then blew out with air, then refilled

Gr8Stang
04-15-2020, 09:55 AM
^^^ I was thinking of draining the fluid I can.....then adding water (and maybe a cooling system cleaner of some sort) and then hard wiring the IC pump to run the fluid through for a bit....then drain & repeat a couple of times?

Slick_89_Hatch
04-15-2020, 10:11 PM
Make sure to bleed it properly after, I had to keep squeezing the hose coming out of the pump to get the air out.

Gr8Stang
04-16-2020, 02:41 PM
Make sure to bleed it properly after, I had to keep squeezing the hose coming out of the pump to get the air out.

Did you leave the cap off the IC reservoir as well?