PDA

View Full Version : Water temp gauge sensor location



lilrifraf666
07-16-2019, 06:43 PM
Hi all,

I'm going bonkers trying to get a correct answer (internet) on where to put in the sensor on a '96 cobra for a Phantom electric water temp gauge to get the best accurate reading. I know there are 3 locations, block, crossover tube or upper rad hose. please help! I can take anymore...lol.

Thanks

ZR
07-16-2019, 07:33 PM
Cross over tube is the best but only if you have a spot for it.

lilrifraf666
07-16-2019, 08:30 PM
The burp plug location with the SS adapter/sensor adapter that dude from SVTP sells on ebay.
https://www.ebay.ca/itm/96-04-Cobra-03-04-Mach1-Terminator-Stainless-Coolant-Crossover-Plug-4-6-32v-DOHC/291696320654?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

ZR
07-16-2019, 09:30 PM
Killer combo.

ZR
07-16-2019, 10:10 PM
Can use your screw in sensor as the fill plug.

lilrifraf666
07-16-2019, 10:21 PM
On the '96, it's in the middle of the crossover tube, so if needed, can still pop this adapter out and still fill it there, why I was on the fence on this location, just want an accurate reading and the least hassle for installing the sensor.

Thanks Rick.

ZR
07-17-2019, 08:38 AM
Absolute best spot is where the factory unit sits.