View Full Version : 04 Cobra Traction control/ABS question
USAWIT2
11-16-2018, 04:55 PM
I recently picked an 04 Cobra, car has a custom tune that also disables the traction control. Which it not a big deal but the ABS light is also on.
So my question, before I go and buy an obd2 scanner to check the codes on the ABS is the ABS light only on because the traction control is turned off permanently?
Or are they no tied together in anyway?
Thanks
Normally when trac is shut off in the tune, ABS light is not on.
USAWIT2
11-16-2018, 05:52 PM
Thanks, kind of figured it shouldn't be. Guess I'll grab a scanner and see what codes it has.
Check all fuses first, next (if it's lowered) check for damage to the inner fender liner on the drivers side as harness is just above it.
If it turns out to be a control module issue (most common in GT / Mach 1) dude on ebay rebuilds them.
USAWIT2
11-16-2018, 07:23 PM
Thanks, will do
Hotford
11-21-2018, 02:45 PM
I have a good used one if ya need it.............pm me for price.
USAWIT2
11-21-2018, 04:13 PM
I have a good used one if ya need it.............pm me for price.Thanks, will do
USAWIT2
11-22-2018, 12:36 PM
If it turns out to be a control module issue (most common in GT / Mach 1) dude on ebay rebuilds them.Just a FYI for those that might run across this thread searching ABS.
I thought about sending my module to the guy on eBay, but after a little searching I ran across a company in Mississauga that does Abs and pcm repairs for different makes and models. 24hr turn around and repairs cost for me is $149+hst. Dropped it off this morning so we'll see how it turns out. https://uploads.tapatalk-cdn.com/20181122/7de069f6c55d55121247482f241355cc.jpg
Nice score, been looking for someone local.
thanks for posting / yes please on results.
maxwell6
11-23-2018, 10:51 AM
Just curious what type of tune do you have on the car. Is it a sctx4 with a hand held. Or is it a chip.
USAWIT2
11-23-2018, 02:13 PM
Just curious what type of tune do you have on the car. Is it a sctx4 with a hand held. Or is it a chip.Custom tune by Steeda with a Sct handheld
USAWIT2
11-23-2018, 03:27 PM
Just an update, dropped the module off yesterday morning, could have picked it up at 5pm last night but left it till this morning.
Got it installed this afternoon and the ABS light is off. I'm sure the ABS should work fine but can't test that till the spring.
USAWIT2
06-14-2019, 10:29 AM
Ghostrider, here is the post
bbriann
06-20-2019, 10:59 PM
FyI I have ABS light on because I have rings removed because 33 spline axles. SCT Tuner cannot turn ABS light off. Some day I will get custom rings and get abs back.
Laffs
06-21-2019, 03:15 PM
FyI I have ABS light on because I have rings removed because 33 spline axles. SCT Tuner cannot turn ABS light off. Some day I will get custom rings and get abs back.
I have that same issue. Pulling the ABS bulb was my temp solution.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.