Media Blasting - Who have you used?

[Chinga]

Looking for someone in Durham Region (preferably) that can strip the paint off a Mustang shell. Surely someone here has been down this road with a build. Pros/Cons: Soda, dry ice or whatever

[hammerhead]

I've seen mobile water guys around...not sure about the Durham area - paint stripper works good too if you just need to remove paint and there's not much rust and is easier to control mess - if you blast to the metal or strip paint to the metal you will need to be sure to get it primed right away... some blasting places will prime after

[USAWIT2]

If there's no rust I would use stripper,
I had only the insides of my rust free trunk and hood blasted by Soda Pro in Mississauga, because I thought it would be easier.
Guy went on and on about his experience etc because I was worried about warpage. Go to pick them up, both warped and unusable. Guy says he didn't do it. WTF?
Anyway I stripped my whole car including jams with Aircraft stripper and a heat gun.
Way less mess to clean up
If I remember correctly, water blasting was about $1000 for the car if I prepped it.https://uploads.tapatalk-cdn.com/20180926/77b3073a945cf3f2ff7d6f31d5d2a38b.jpg

[Screw]

If there's no rust I would use stripper,
I had only the insides of my rust free trunk and hood blasted by Soda Pro in Mississauga, because I thought it would be easier.
Guy went on and on about his experience etc because I was worried about warpage. Go to pick them up, both warped and unusable. Guy says he didn't do it. WTF?
Anyway I stripped my whole car including jams with Aircraft stripper and a heat gun.
Way less mess to clean up
If I remember correctly, water blasting was about $1000 for the car if I prepped it.https://uploads.tapatalk-cdn.com/20180926/77b3073a945cf3f2ff7d6f31d5d2a38b.jpg

your determined

[USAWIT2]

your determinedThanks, but I'm beginning to think I'm bordering on stupidity

[Screw]

I did same thing to a set of wheels never mind a whole car , in the end I said fak it orange peel is ok