Oil catch can question...

[Stephen06GT]

I've searched the interweb and am getting conflicting answers to this question:

Will a JLT or similar, driver's side oil catch can work/fit with an M90 supercharger on a 2006 Mustang GT?

I know a few of you have boosted GTs, so does anyone first hand knowledge?

Thanks

Stephen

[Minaccia]

Can't really answer your question but on the Coyote motors the passenger side can is always dry on my car and it's the passenger side that accumulates all the oil vapors.

[NickD]

As far as reaching and using the built in quick disconnects I don't know, that said I was able to use my UPR can just the same, inlet to valve cover, ouput to a vac source (back of the blower or elbow)
I have found that I do smell stuff out of the passenger side valve cover which would normally go to the intake as a source of air into the crank case so maybe a good idea to put one on each side.

Sent from my Nexus 9 using Tapatalk

[Monera3v]

I built my own using the 5.0L hoses and UPR catch cane with the baffle at the bottom.
Works great! still, see a lil oil at the TB, might do the passenger side next.