tremec 3550/tko

[4GOTNPNY]

who has swaped the t5 for one of these im currently in the process of swapping my T5 out its not a fox but i wanted to know what you fox guys have done what did you have to change i noticed my cross member has to go for sure does the stock hight mount need to be changed as well?

[2DXTRM]

Can you flip the cross member (Right Side to Left Side) to get the mount to line up?

Also, you will need at least a 3/8" shims (between trans mount and the trans itself OR between mount and crossmember) to make up for the pinion angle change.

[ZR]

Good point on pinion angle. Well worth putting a gauge on it to be sure where you end up.

[4GOTNPNY]

what should my pinion angle be? i can put a guage on it just want to know the proper degree before i fab anything up. cant turn the cross memeber around unfortunatly so i will be making a new one out of steel tubing