What are these heads worth?

[1986stangfan]

Used pair of Edelbrock 60379 heads


https://uploads.tapatalk-cdn.com/20180208/217beefe02d2bf48aa7b64b22dd09a7e.jpg
https://uploads.tapatalk-cdn.com/20180208/4a3b9c795d81bd566306d31fbe206bce.jpg

https://www.americanmuscle.com/edelbrock-performerheads-50-pair.html



Sent from my iPhone using Tapatalk

[Ponyryd]

Around a grand if they’re in working order, tough to tell by the pics but the valves don’t look great.

[1986stangfan]

Rick any input?


Sent from my iPhone using Tapatalk

[ZR]

As said above, hard to tell from pics but in usable as is condition I'd also say in the 1k or slightly above range.

[1986stangfan]

As said above, hard to tell from pics but in usable as is condition I'd also say in the 1k or slightly above range.

Thanks, I was mostly meaning in regards of condition. I know you’re the Gandalf of mustangs :)


Sent from my iPhone using Tapatalk

[ZR]

Unless you know exactly where they came from, always best to pay machine shop to go through em before installing.

[1986stangfan]

Decided to go with a brand new set of e street heads


Sent from my iPhone using Tapatalk

[4GOTNPNY]

Decided to go with a brand new set of e street heads


Sent from my iPhone using Tapatalk

make sure you change the springs for your roller setup and i would change the rocker studs to ARP hardware the e streets are edelbrocks entry level head to compete with the chinese market rocker studs break and the springs to not support roller cams

[Cloud nine]

make sure you change the springs for your roller setup and i would change the rocker studs to ARP hardware the e streets are edelbrocks entry level head to compete with the chinese market rocker studs break and the springs to not support roller cams

I heard the same thing about those heads.

[juvehab]

make sure you change the springs for your roller setup and i would change the rocker studs to ARP hardware the e streets are edelbrocks entry level head to compete with the chinese market rocker studs break and the springs to not support roller cams

so they are good for nothing then.

[Cloud nine]

so they are good for nothing then.

Junk. Cheap for a reason.

[4GOTNPNY]

so they are good for nothing then.

not exactly if your building a flat tappet motor they are fantastic change the rocker studs and away you go. they are entry level to compete with cheap chinese heads on the market the casting are great and flow good numbers so they are not a bad buy i bought my brand new set for 700 bucks from a guy on kijiji years ago so springs and studs arent to bad. if your building a moster motor and expect the world from entry level heads well you get what you pay for. im just giving helpfull advice so he knows and doesnt go down the road and loose a rocker i would be pissed if it happend to me lol