Camshaft selection

[1986stangfan]

Time to beat a dead horse. I am in the middle of gathering parts for a mild build of my 95. The plan is to install my newly acquired Kenne Bell blowzilla. I am looking for a cam with good street manners, that will pass emissions and good low end grunt. I have r been reading a lot about Anderson B-31, the good ol B303 and E303 cams but I am open to suggestions. I haven’t selected or purchased heads yet, so that is one outlier. Fuel system will consist of 42lb injectors and 255lph fuel pump, with a sct MAF.

Bottom end will remain stock for the Time as my goal is only around 350hp

Sent from my iPhone using Tapatalk

[ZR]

Reliable choice, TFS stage I.

[1986stangfan]

Reliable choice, TFS stage I.

Works well with blower? Passes emissions?


Sent from my iPhone using Tapatalk

[ZR]

Yes, plays well with all of the above.
In the same breath, B cam does sound horny out the tail pipes though.

[1986stangfan]

Yes, plays well with all of the above.
In the same breath, B cam does sound horny out the tail pipes though.

It sure does, but from my research is hit or miss on the emissions side

I also have a line on a lightly used B303

Sent from my iPhone using Tapatalk

[ZR]

With tweaking, in a 5.0 with cats, easy to even get a B cam to pass. While it's a good old camshaft, do yourself a solid n go with the TFS. Don't forget a fresh set of FMS roller lifters + timing chain set.

[1986stangfan]

With tweaking, in a 5.0 with cats, easy to even get a B cam to pass. While it's a good old camshaft, do yourself a solid n go with the TFS. Don't forget a fresh set of FMS roller lifters + timing chain set.

I was planning on new roller lifters, roller rockers and timing chain


Sent from my iPhone using Tapatalk

[Tailites]

F cam

[1986stangfan]

I was looking at buying a Remanufactured cobra longblock with gt40 heads. Would be around $3000.


Sent from my iPhone using Tapatalk

[Ponyryd]

^If you don’t need one that’s a lot of money you don’t need to spend, Gt40 heads are okay, but your stockers with a good cam and KB will get you to your power goals.

I’d go b-cam if it was me, TVs is a great choice, but something about telling people “it’s got a b-cam” seems right, lol.

F cam

Not e-legal.....

[1986stangfan]

Now that I know my head selection (ported gt40) it’s the Kenne Bell blowzilla, 42lb injectors I am still trying to determine camshaft. The leader in my mind is the tfs stage 1 but I am a little concerned about using 1.7rr with the tfs 1

[1986stangfan]

Pretty interesting article http://www.mustangandfords.com/how-to/engine/mmfp-0205-ford-mustang-5-0-kenne-bell-cam-combos-comparison/